Sidewall Conveyor Accessories
short description:
JCH-TIKTOP specializes in the production of large-inclination corrugated sidewa
content details
I. Product Structure and Composition
- It is made of multi-layer nylon or polyester skeleton, with wear-resistant rubber covering the top and bottom, ensuring overall tensile strength and toughness, stable operation and no easy deformation.
- It is a wave-shaped flexible retaining edge with good stretching and bending performance. It runs smoothly without tearing as the conveyor belt moves and effectively prevents materials from spilling sideways.
- Installed between the side ribs, it is set with different heights and spacing according to the conveying inclination angle and material characteristics to support the materials and realize large-inclination or even vertical lifting.
inclination and small footprintIt can realize large-angle conveying of 30° to 90° or even vertical conveying, greatly shortening the equipment length, reducing the floor area, and lowering the overall construction cost.
Large conveying capacity and higher efficiency
Compared with ordinary flat belts, the conveying capacity can be increased several times under the same belt width, making it suitable for continuous and high-output production lines.
No material spillage or leakage
The combined structure of corrugated side ribs and transverse partitions prevents materials from rolling or spilling during transportation, improving the on-site environment.
Wear-resistant and tear-resistant, with long service life
The base belt, side skirts and partitions are all made of highly elastic and highly wear-resistant rubber, which is impact-resistant, flex-resistant and not easy to crack and delaminate.
Smooth operation and strong adaptability
It can be used with general high-angle conveyors, and can operate stably during turning, climbing and vertical lifting, with simple maintenance.
Complete specifications available, custom support
The belt width, rib height, partition height, belt body length and other parameters can be customized according to the equipment size, conveying inclination angle and material properties.
III. Scope of Application
Applicable industries: mining, sand and aggregate, coal, grain, building materials, chemical industry, ports, construction waste treatment, etc.
Suitable materials: ores, sand and gravel, limestone, coal, grain, chemical fertilizers, muck, block and granular materials
Applicable working conditions: large-angle conveying, vertical lifting, narrow space sites, high-yield continuous conveying scenarios
IV. Common Specifications (Customizable)
Belt width: 300mm～2200mm
Rib height: 40mm, 60mm, 80mm, 100mm, 120mm, 160mm, 200mm, etc.
Baffle height: 40mm～200mm
Inclination angle: 0°～90°
Skeleton type: NN nylon, EP polyester, cotton canvas, etc.
Length: Customized according to equipment requirements
V. Core Advantages of Hainan Sikejia Mining Equipment
Integral vulcanization process, firm structure
The flanges, partitions and base belt are integrally vulcanized and formed, with high bonding strength, and are not easy to fall off or delaminate during long-term operation.
Mature material formula, wear-resistant and aging-resistant
The rubber formula is optimized for abrasive materials such as mine sand and gravel, making the belt resistant to impact and flexing, with a longer service life.
Precise dimensions and strong compatibility
Customized according to equipment drawings or parameters, it perfectly matches various sidewall conveyors, featuring convenient installation and stable operation.
In stock + Rapid Customization
Standard specification sidewall belts are in stock, and the lead time for non-standard customization is short, which can meet the urgent replacement needs of mines.
Factory direct supply, high cost performance
Source production, no price markup by middlemen, more discounts for bulk purchases, and technical selection and after-sales support are also provided.
VI. Frequently Asked Questions (FAQ)
Can the large-inclination corrugated sidewall belt be used for vertical conveying at maximum?
Yes. With a reasonable configuration of the side skirts and partition plate structure, near-90° vertical conveying can be achieved, greatly saving space.
Will large bulk materials get stuck during transportation?
The appropriate spacing between the partition plates and the height of the side guards can be selected according to the particle size of the material, and our company can provide a professional selection plan.
What to do if the side rib is easily torn?
Our company adopts high-elasticity flexible rubber flanges, combined with the overall vulcanization process, which have good flexural performance and are not easy to tear under normal use.
What parameters need to be provided for customized sidewall conveyor belts?
The belt width, belt length, rib height, partition height, conveying inclination angle, material type and other parameters need to be provided. Our company can provide free selection assistance.
II. Product Features
Large conveying inclination and small footprint
It can realize large-angle conveying of 30° to 90° or even vertical conveying, greatly shortening the equipment length, reducing the floor area, and lowering the overall construction cost.
Large conveying capacity and higher efficiency
Compared with ordinary flat belts, the conveying capacity can be increased several times under the same belt width, making it suitable for continuous and high-output production lines.
No material spillage or leakage
The combined structure of corrugated side ribs and transverse partitions prevents materials from rolling or spilling during transportation, improving the on-site environment.
Wear-resistant and tear-resistant, with long service life
The base belt, side skirts and partitions are all made of highly elastic and highly wear-resistant rubber, which is impact-resistant, flex-resistant and not easy to crack and delaminate.
Smooth operation and strong adaptability
It can be used with general high-angle conveyors, and can operate stably during turning, climbing and vertical lifting, with simple maintenance.
Complete specifications available, custom support
The belt width, rib height, partition height, belt body length and other parameters can be customized according to the equipment size, conveying inclination angle and material properties.
III. Scope of Application
Applicable industries: mining, sand and aggregate, coal, grain, building materials, chemical industry, ports, construction waste treatment, etc.
Suitable materials: ores, sand and gravel, limestone, coal, grain, chemical fertilizers, muck, block and granular materials
Applicable working conditions: large-angle conveying, vertical lifting, narrow space sites, high-yield continuous conveying scenarios
IV. Common Specifications (Customizable)
Belt width: 300mm～2200mm
Rib height: 40mm, 60mm, 80mm, 100mm, 120mm, 160mm, 200mm, etc.
Baffle height: 40mm～200mm
Inclination angle: 0°～90°
Skeleton type: NN nylon, EP polyester, cotton canvas, etc.
Length: Customized according to equipment requirements
V. Core Advantages of JCH-TIKTOP Mining Equipment
Integral vulcanization process, firm structure
The flanges, partitions and base belt are integrally vulcanized and formed, with high bonding strength, and are not easy to fall off or delaminate during long-term operation.
Mature material formula, wear-resistant and aging-resistant
The rubber formula is optimized for abrasive materials such as mine sand and gravel, making the belt resistant to impact and flexing, with a longer service life.
Precise dimensions and strong compatibility
Customized according to equipment drawings or parameters, it perfectly matches various sidewall conveyors, featuring convenient installation and stable operation.
In stock + Rapid Customization
Standard specification sidewall belts are in stock, and the lead time for non-standard customization is short, which can meet the urgent replacement needs of mines.
Factory direct supply, high cost performance
Source production, no price markup by middlemen, more discounts for bulk purchases, and technical selection and after-sales support are also provided.
VI. Frequently Asked Questions (FAQ)
Can the large-inclination corrugated sidewall belt be used for vertical conveying at maximum?
Yes. With a reasonable configuration of the side skirts and partition plate structure, near-90° vertical conveying can be achieved, greatly saving space.
Will large bulk materials get stuck during transportation?
The appropriate spacing between the partition plates and the height of the side guards can be selected according to the particle size of the material, and our company can provide a professional selection plan.
What to do if the side rib is easily torn?
Our company adopts high-elasticity flexible rubber flanges, combined with the overall vulcanization process, which have good flexural performance and are not easy to tear under normal use.
What parameters need to be provided for customized sidewall conveyor belts?
The belt width, belt length, rib height, partition height, conveying inclination angle, material type and other parameters need to be provided. Our company can provide free selection assistance.
